DR PROF ING GURUDUTT SAHNI BIOGRAPHY & CV

POSTAL ADDRESS:

780/A, NEW GOPAL

NAGAR,JALANDHAR CITY-8

   PUNJAB (INDIA  )                                                                                DR.PROF(Ing)GURUDUTT           SAHNI

                                                         PHD(MECH ENGG.),MBA, DOCTORATE IN MANAGEMENT STUDIES,POST DOCTORAL(MECH. ENGG.)

                                                                        CHARTERED ENGINEER.(IEI) INDIA &QMS LEAD AUDITOR(IRCA  TR.),CHARTERED VALUER, Int PE

   ,                                                                     PROFESSIONAL ENGINEER (PEngg)

                                                                           (REGISTRATION WITH REGISTER  OF BOARD OF PROFESSIONAL ENGINEERS BRPE & CIDC),LIFE EXECUTIVE MEMBER(COUNCIL OF 

                                                                          ENGINEERS&VALUERS), FELLOW-ISME,LIFE MEMBER(EUROSCIENCE), FELLOW-ICC(INTERNATIOAL COUNCIL OF COUNSULTANCY) FM/ICC/555

                                                                       FELLOW (IRED), MIAENG, LIFEMEMBER (INTERNATIONAL ASSOCIATION OF MECHANICAL ENGINEERS)

 

FELLOW-ICC  (INTERNATIONAL COUNCIL OF CONSULTANCY)

                                                                        MISIE,MMISOM, EIOSRD,, FELLOW- ASR(ASIA SOCIETY OF RESEARCHERS), SIOSRD, MEMBER (INTERNATIONAL SOCIETY OF ENGINEERS),                                                                                                         LIFE TIME MEMBER(TERA)&(HBSRA)& LIFE MEMEMBER (STRA)EURASIA RESEARCH(SCHOLARLY ASSOCIATION),MIAAM-SWEEDEN,

LIFE MEMBER—ISER(  (INSTITUTE FOR SCIENTIFIC AND ENGINEERING RESEARCH)  ) LIFE Membership no:   ISER MEMBERSHIP_19003126

, LIFE MEMBER-IAAM(SWEEDEN), LIFE MEMBER-Science Innovation Union,Oxford ,United Kingdom

 

                      PROFESSOR( MEMBER)-ANAHEI-ASSOCIATION OF NORTH AMERICA HIGHER EDUCATION INTERNATIONAL, USA

.                IMRTC-USA –RESEARCH ADVISOR,REFREE, PROFESSOR AT IMRTC PANEL(International Management Research & Technology Consortium )USA

                     IMRTC-USA –PROFESSIONAL TRAINER-ENGINEERING&MANAGEMENT- AT IMRTC PANEL(International Management Research & Technology Consortium )USA

              IMRTC-USA –MEMBER OF ASSOCIATION OF TECHNOLOGY MANAGEMENT- AT IMRTC PANEL(International Management Research & Technology Consortium )USA

 

            IASED- Central Board of Advisory / Reviewers, international review board and scientific committee member (technical)                         (INTERNATIONAL ACADEMY OF SCIENCE AND ENGINEERING FOR DEVELOPMENT),Mongkok, Hong Kong

 AFFILIATE MEMBER- Postdoctoral membership (National Postdoctoral Association-MD,USA), Postdoctoral membership(antibody-related research and development.,MA, USA) AIRR Community membership-USA, Corporate sponsor membership-USA(Postdoctoral Association)

Affiliated Postdoctoral Member(CLARE HALL CAMRIDGE,UNIVERSITY OF CAMBRIDGE, UK),SeniorFellow( SFSIE SRP ) The Society of Innovative Educationalist & Scientific Research Professional,MALASYIA,

       SENIOR MEMBER (IASED) HONGKONG,  MEMBER(HIGH SCOPE-MI-USA)

                     LIFE MEMBER Number: 17376 (IAHS-INTERNATIONAL ASSOCIATION OF HYDROLOGICAL SCI                             SCIENCES,UK)

      LIFE Senior Member INSCIAT-SM002316(Institute of Natural Science and Advanced Technology,Taiyuan, China.)

     Affiliate member-7949 RDA(The Research Data Alliance) the Australian Government’s Department of Innovation

      LIFE MEMBER ID: 23311 -The Society of Digital Information and Wireless Communications (SDIWC)  

      LIFE MEMBER- National HRD Network (NHRDN)

      MEMBER(IRSET)-THE INTERNATIONAL RESEARCH SYMPOSIUM ON ENGINEERING &TECHNOLOGY,JAPAN

   PROFESSIONAL MEMBER(ISPRS)-INTERNATIONAL SOCIETY FOR PHOTOGRAMMETRY&REMOTE SENSING,MD,USA 

   ASSOCIATE MEMBER—IAOP, USA

   

LIFE TIME COMMUNITY MEMBER –EAI( European Alliance for Innovation) Nitra, Slovakia-BOSTON

MENTOR –AUTHOR AID(A GLOBAL NETWORK OF RESEARCHERS-INASP (the International Network for the Availability of Scientific Publications)OXFORD-UK

ADVISORY-MAXQD A ResearchNetwork FORUM—BERLIN

 

MEMBER-IAS( International Association of Scientologists .England, ), INDIVIDUAL-IND VDGOOD Professional Association Member

Membership ID

VDME1013

 

FELLOW MEMBER (IRA ) INDIAN RESEARCH ASSOCIATION INSPIRA

LM-IRA - 430

 

 

DESIGNATION:

 

HEAD OF DEPARTMENT & DY. GENEREL MANAGER ( DEPTT. OF DESIGN, DRAWING &DEVELOPMENT—R&D )LEADER VALVES LTD,JALANDHAR CITY,PUNJAB& ADJUNCT PROFESSOR DAVIET, JALANDHAR CITY, VISITING PROFESSOR AT  CTIEMT(ENGINEERING &MANAGEMENT COLLEGE) JAL(PB)  &  QMS  LEAD  AUDITOR (IRCA   TR.)&( BOS) BOARD OF STUDIES(GNA UNIVERSITY), (BOM)Board of Mentors as an honoured member AS National Level Internship Program (NLIP) BETWEEN  All India Council for Technical Education (AICTE), Ministry of Human Resource Development, Govt. of India AND ENGINEERING COUNCIL OF INDIA (ECI)   ,CO-CHAIRPERSON-IFERP(INTERNATIONAL FEDERATION OF ENGINEERS&RESEARCHERS) REGIONAL CHAPTER,PRESIDENT& DIRECTOR GENERAL AT IRER( INTERNATIONAL REGISTER OF ENGINEERS&RESEARCHERS)     

 

 

 

SUBJECT SPECIALIZATION FOR ACADEMICS AND PROFESSIONALS: MECHANICAL ENGINEERING,THERMAL ENGINEERING, FLUID ENGINEERING, INDUSTRIAL ENGINEERING, DESIGN  OF MECHANICAL MACHINE ELEMENTS, METALLURGY,CAD/CAM,MANAGEMENT,INDUSTRIAL MANAGEMENT

 

PROFESSIONAL:

1.World Academy of Science, Engineering and Technology(WASET) EXECUTIVEMember Scientific Committee and Editorial Review Board on Engineering and Physical Sciences, World Academy of Science, Engineering and Technology& International Scientific Committee and Editorial Review Board on Mechanical and Industrial Engineering

 

2.INTERNATIONALLIFE TIME MEMBER OF International Organization of Scientific Research (IOSR)

 

3.INSTITUTION OF ENGINEERS (INDIA) CORPORATE MEMBER AND C ENG.

 

4.EDITORIAL REVEIW BOARD INTERNATIONAL JOURNAL OF MECHANICAL

ENGINEERING & TECHNOLOGY (IJMET)

 

5. EDITORIAL REVEIW BOARD INTERNATIONAL ASSOCIATION FOR ENGINEERING

AND MANAGEMENT EDUCATION (IAEME)

 

6.EDITORIAL REVEIW BOARD : IMPACT JOURNALS , OHIO ,US

 

7. EDITORIAL REVEIW BOARD International Journal of Research in Engineering & Technology ( IJRET )

 

8. EDITORIAL REVEIW BOARD INTERNATIONAL RESEARCH JOURNAL OF SCIENCE ENGINEERING ANDTECHNOLOGY

 

9. EDITORIAL REVEIW BOARD   International Research journal of Management Science and Technology
 ISSN 2250 – 1959 (online) ISSN 2348 – 9367 (Print)

10. EDITORIAL REVEIW BOARDThe International Journal of Research in Mechanical Engineering and Technology (IJRMET)cosmic journals

11. EDITORIAL  BOARDCOMMITEEGLOBAL JournalS of ENGINEERING Research AND MANAGEMENT(GJESRM)

12. EDITORIAL  BOARD COMMITEE MEMBER GLOBAL RESEARCH FORUM INTERNATIONAL ACADEMY OF SCIENCE, ENGINEERING AND TECHNOLOGY, US

 13.   EDITORIAL  BOARD COMMITEE MEMBER IJTE - IAEME Publication, IJMET, IJCIET, IJCET, IJECET, IJARET

14, fellow member institute of research engineers and doctors  theIRED, US

15,EDITORIAL  BOARD COMMITEE MEMBER International Organization of Scientific Research and Development

16.FELLOW MEMBER ASIA SOCIETY OF RESEARCHERS , HONG KONG

17.EXECUTIVE SOCIETY MEMBER , INTERNATIONAL SOCIETY OF ENGINEERS  OF International Organization of Scientific Research and Development

18. EDITORIAL  BOARD COMMITEE MEMBER Institute for engineering research and publication(IFERP)

19.LIFE TIME MEMBER The International Technology and Engineering Educators Association (ITEEA)

20. LIFE MEMBER TEACHING AND EDUCATION RESEARCH ASSOCIATION(TERA)

        EURASIA RESEARCH  TERA M-18508

 

21. IMRTC-USA –RESEARCH ADVISOR,REFREE, PROFESSOR AT IMRTC PANEL

(International Management Research & Technology Consortium )USA

22. LIFE TIME MEMBER :745261914164 (IAAM)International Association of Advanced Materials,SWEEDEN

23.EDITORIAL  BOARD COMMITEE MEMBER  ATLAS PUBLISHERS-USA Scientific Research        PUBLICATION

24. Editorial Board, Reviewers Committee, Conference Organizing Committee and Advisory Board of ISER(INSTITUTE FOR SCIENTIFIC AND ENGINEERING RESEARCH

          LIFE Membership no:   ISER MEMBERSHIP_19003126

25. EXECUTIVEMember Scientific Committee(The Society of Innovative Educationalist & Scientific Research Professional,MALASYIA) and Editorial Review Board MEMBER ,MALAYSIA

26. Innovative Scientific Research Professional Malaysia Sdn.Bhd

Kuala Lumpur (914846-M )

KualaLumpur,MalaysiaHon.EditorialBoardMember-TechnicalEditor

Journal of Automotive Mechanical

&AerospaceEngineeringResearch

27. Innovative Scientific Research Professional Malaysia Sdn.Bhd

KualaLumpur,MalaysiaHon.EditorialBoardMember-TechnicalEditor

Engineering Today

ISSN: 2180-0995

28 Innovative Scientific Research Professional Malaysia Sdn.Bhd

KualaLumpur,MalaysiaHon.EditorialBoardMember-TechnicalEditor --Journal of Engineering Technology

& Management Science

ISSN: 2229-9254

29. EDITORIAL  BOARD COMMITEE MEMBER AND REVIEWER--GREEN PUBLICATIONS

30. EDITORIAL  BOARD COMMITEE MEMBER AND REVIEWER—ENGINEERING PUBLISHINGHOUSE-EPH

31. EDITORIAL  BOARD COMMITEE MEMBER AND REVIEWER—IJRDO-INTERNATIONAL JOURNAL OF RESEARCH DEVELOPMENT ORGANISATION --JOURNALS

32. EDITORIAL  BOARD COMMITEE MEMBER AND REVIEWER IOJPH- International open Journal of Science And Engineering

33. EDITOR--International Journal of Research Publication (IJRP) ----http://ijrp.org/user/Dr-GURUDUTT-SAHNI/758

34. EDITORIAL  BOARD COMMITEE MEMBER AND REVIEWER "Global Journal of Engineering Science and Research Management"--- http://www.gjesrm.com/Editorial%20Board.html

35. Editorial Board/- Advisory Editorial Board Members---International Journals--International Journal of General Engineering and Technology-- http://iaset.us/editorial-board/international-journals/international-journal-of-general-engineering-and-technology

36. Editorial Board/- Advisory Editorial Board Members--- International Journal of Scientific and Research Publications http://www.ijsrp.org/ijsrp-editorial-board.php?page=5

37. IINTERNATIONAL COMMITTEE MEMBER---Mechanical Engineering Design and Analysis Conference ... - waset

https://waset.org/conference/2019/02/mumbai/ICMEDA/committees

Feb 8, 2019 - ICMEDA 2019 : International Conference on Mechanical Engineering Design and Analysis Conference

,

38. EDITORIAL  BOARD COMMITEE MEMBER AND REVIEWER SSRG INTERNATIONAL JOURNAL www.internationaljournalssrg.org/

International Journal of Engineering Science & Technology, Social Science & Humanities

39 IJCRT - INTERNATIONAL JOURNAL OF CREATIVE RESEARCH THOUGHTS
(Impact factor: 7.97 | www.ijcrt.org | editor@ijcrt.org 

40.Review Memberof our Review Committee.
 Member ID is: 116844

41. Review Member of our Review Committee.
 Member ID is:  116844 3 http://www.IJRAR.org/rms 83333 International CForefront Journal of Engineering & Technology

eer-Review Members

42. PEER REVIEWER MEMBER  IAARHIES (The International Academic Association of Researchers in Humanities, IT, Engineering & Science) is an international non-profit forum and association of researchers in the field of Humanities, Information Technology, Engineering and Science https://iaarhies.org/reviewmember

 

43     EDITORIAL MEMBER ----SCIETIFIC FOREFRONT JOURNALS (Forefront Journal of Engineering & Technology)

         http://www.scientificforefront.org/sub_subject.php?code=1

 

44. EDITORIAL MEMBER ------International Journal of Advanced Engineering, Science and Technological Research (IJAESTR)        http://ijaestr.org/index.aspx

 

F4343http://www.scientificforefront.org/sub_subject.php?code=1oForefront Journal of Engineering & Technology

Forefront Journal of Engineering & Technology

refroForefront Journal of Engineering & Technology

nt Journal of Engineering & Technology

n

 

 

 

 

M434343echanical Engine

ACADEMICS:

 

 

BE IN MECHANICAL ENGG.(HONS) FROM GURUNANAK DEV ENGG. COLLEGE,LUDHIANA(PB) UNDER PUNJAB TECHNICAL UNIVERSITY,JAL(PB),INDIA(1996-2000) THREE YEARS DIPLOMA IN MECHANICAL ENGG.(HONS) FROM MEHR CHAND POLYTECHNIC,JAL. UNDER PUNJAB BOARD OF TECH. EDUCATION.(CHD)(PB) INDIA(1992-1995) NDT LEVEL-II CERTIFIED ASNT(AMERICAN SOCIETY OF NON DESTRUCTIVE TESTING) IN  MPI, UT(ULTRASONIC TESTING).         Certificate no. J/173/UT date of issue:16-10-04           Certificate no. J/165/MT date of issue:24-09-04 NDT LEVEL-II CERTIFIED IN DP TESTING FROM ISNT (INDIAN SOCIETY OF NON DESTRUCTIVE TESTING)          Certificate no. NCB/0711/DEL/00607  - NDT LEVEL-II CERTIFIED ASNT(AMERICAN SOCIETY OF NON  DESTRUCTIVE TESTING) IN  RT (RADIOGRAPHIC TESTING). MBA FROM IIBMT(MUMBAI) INDIA   WITH A+ GRADE MTECH IN MECHANICAL ENGG.WITH (HONS)(SPECIALIZATION IN MACHINE DESIGN )FROM DR BABA SAHHIB AMBEDKAR TECHNOLOGIGICAL UNIVERSITY (STATE  UNIVERSITY) WITH 73%MARKS :SPECIALIZATION IN METALLURGICAL ENGINEERING MTECH IN MECHANICAL ENGG.(SPECIALIZATION FLUID & THERMAL ENGG.)FROM SU, PILANI WITH 70%MARKS MBA (OPERATION MANAGEMENT) FROM JNU UNIVERSITY PHD—(DOCTOR OF PHILOSPHY(PHD) IN MECHANICAL ENGG.) , CHATRAPATI SHIVAJI SAHU JI MAHARAJI  UNIVERSITY ( STATE UNIVERSITY)  KANPUR UNIVERSITY, KANPUR POST DOCTORAL IN MECHANICAL ENGINEERING (IIT) DOCTOR OF PHILOSPHY(PHD) IN MECHANICAL ENGG. ,CWU,TEXAS, US      ( GPA-3.6/4.0) DOCTORATE IN MANAGEMENT STUDIES,IIBMT,MUMBAI(INDIA) BE WITH HONS. ,DIPLOMA IN MECH. ENGG WITH HONS 1ST IN COLLEGE 2ND IN STATE (1992-95) AMIE MECHANICAL ENGINEERING-INSTITUTION OF ENGINEERS (INDIA) NO. AM-094844-9
Summary of qualifications
Education	- CHARTERED ENGINEER (INDIA) CERTIFIED-INSTITUTION OF    ENGINEERS Reg no.-094844-9-05/2007 PE (NATIONAL REGISTER OF PROFESSIONAL ENGINEERS)Reg no.-PE/00176/16   - BE(HONS. ) IN MECH. ENGG. WITH 74% MARKS - DME (HONS. ) IN MECH, ENGG. WITH 76%MARKS - CERTIFIED INTERNAL&EXTERNAL AUDITOR ISO9001:2008(LLYODS REGISTER) (Cert. no. 3281VHQ/0300101/18) - QMS LEAD AUDITOR EXTERNAL  (IRCA TR) ISO 9001 QUALITY MANAGEMRNT SYSTEMS - AWS (II)  INDIAN INSTITUTE OF WELDING,N DELHI (Cert.No. R-9312)
Professional experience	-AT PRESENT WORKING AS H.O.D& DGM (DESIGN ,DRAWING &DEVELOPMENT-R&D)IN LEADER VALVES LTD, JALANDHAR(PUNJAB) INDIA LEADING VALVE&FITTINGS MANUFACTURING COMPANY.MAUFACTURING INDUSTRIAL VALVES, CRYOGENIC VALVES, FIRE SAFE VALVES OF ALL TYPES,GATE, GLOBE ,CHECK, REGULATING,PRESSURE REDUCING VALVES, ISOLATING VALVES ETC ABOUT LEADER VALVES LTD,JAL, PUNJAB leading valve manufacturing company in India. We are a totally integrated valves manufacturing unit with our own Ferrous & Non Ferrous Foundries, Forging, Machining and Testing facilities. The company was set- up more than five decades ago when India was on the threshold of industrial revolution and there were no good valve manufacturers in the country. We are in ISO-9001: 2015 company since Jan 1996 certified by LRQA, India. Our quality COMPANY PROFILE:- LEADER VALVES LIMITED is a l system is also certified by API. We are licensed to use monograms of API Spec 6D (Certificate no 6D-0346), and API 600 (Certificate No. 600-0018) The valves are also tested for "Seismic Qualification" of bi-directional valves by the Structural Integrity Division of National Aerospace Laboratory Bangalore. Leader Valves has also entered into an agreement with M/s. ENOLGAS.p.a. Italy for marketing of their entire range of products in India. This agreement also facilitate export of our product to world market through M/s. ENOLGAS. M/s. ENOLGAS is a world leader in wide range of gas safety devices, Manually, Electrically & Pneumatically operated valves in Brass, Carbon Steel & Stainless Steel for Plumbing & Industrial applications,MANUFACTURING ALL TYPE OF INDUSTRIAL VALVES, FIRE SAFE, CRYOGENIC VALVES APPLICATIONS                                   -(ADJUNCT)PROFESSOR (MECHANICAL ENGINEERING) IN DAVIET ENGG. COLEGE, JALANDHAR CITY, PUNJAB DAV Institute of Engineering & Technology Jalandhar got established in year 2001 under the aegis of DAV college Managing committee. The institute is approved by AICTE and affiliated to Punjab Technical University,Jalandhar. This is the first degree level Engineering Institute started by the DAV College Trust and Management Society.The DAV College Trust and Management Society is the largest non-government educational organization in India managing a chain of 700 institutions in India and abroad.The institute is located in the heart of city on a prime piece of land adjacent to DAV College,Jalandhar on the left side of Jalandhar-Amritsar National Highway spread over an area measuring about 18 acres possessing extremely beautiful landscape with a running canal on its back and historical BurltonPark on its front. DAVIET is carrying out original research of significance and technology development at the cutting edge. It imparts training to students to make them competent, motivated engineers and scientists. The Institute not only celebrates freedom of thought, cultivates vision and encourages growth, but also inculcates human values and concern for the environment and the society. -VISITING PROFESSOR (MECHANICAL ENGINEERING) CTIEMT  SHAHPUR  JCT Institute of Engineering, Management & Technology, Jalandhar got established in year 2004 by the CT Educational Society with the objective of creating leading Research and Development facilities in the field of Engineering, Technology & Management.  The institute is approved by AICTE and affiliated to Punjab Technical University, Jalandhar. The institute currently offers regular 08 UG programmes in  various disciplines of engineering and 04PG programme in  various disciplines of Engineering, Management & Computer Applications. The admissions to the various UG/PG programmes at CTIEMT are offered as per the eligibility criterion laid down by PTU. One third strength of the students in the first year of the course is by direct selection under the Management quota, while remaining seats are filled up by the University based on the counseling scheduled by the university.The institute is conveniently located in Shahpur that is hardly 10 km from ISBT, Jalandhar. The campus is housed in lush green environment providing an extremely peaceful and pollution-free location which is ideally conducive for academics and research. CTIEMT is carrying out original research of significance and technology development at the cutting edge. It imparts training to students to make them competent, motivated engineers and scientists. The Institute not only celebrates freedom of thought, cultivates vision and encourages growth, but also inculcates human values and concern for the environment and the society.All the departments have well equipped laboratories with modern facilities where UG/PG students perform experiments to gain practical knowledge and insight, which is a very important aspect of engineering education. During the semester, value added Domain Specific training programs are conducted by industry in-house for students in specialized areas such as Embedded systems, Digital System Design, oracle, Microsoft technologies, IBM Technologies, Big Data, Business Analytics, Mobile Computing, solid edge etc. To strengthen industry institute interaction, MOUs have been signed with leading industries viz. IBM,TEXAS INSTRUMENTS,SIEMENS,ORACLE,HCL to name a few and programs are conducted for students which are designed by the industry. Seminars are organized regularly in collaboration with experts from industry so that students are trained to be absorbed by the industry.The Departments of Computer Science & Engineering (CSE), Information Technology (IT), Electronics & Communication Engineering (ECE) & Mechanical Engineering are the leading departments in the Institute. These departments have built excellent infrastructure to run the Bachelor and Master degree programmes. These departments have good interaction and backing up from industry and the leading  educational institutes of national importance in India and abroad. All these students have been well placed with JALANDHAR,PUNJAB   -WORKED AS CE AND PRINCIPAL ENGINEER FOR SECTIONS  HEAT TREATMENT AND METALLURGY WITH SPECIALIZATION IN HEAT TREATMENT PROCESSES FOR ALLOY STEEL/HT STEEL , Cu ALLOY STEELS , CAST CARBON STEELS. STAINLESS STEELSSS410 AND OTHER GRADES , GREY IRON CASTINGS ETC, BOTH FERROUS AND NON FERROUS  IN LEADER VALVES LTD AND FORGING PROCESSES FOR ASTMA105, LF2.F304,F316 ETC , F5, F11 F55 ETC LEADER VALVES LIMITED is a leading valve manufacturing company of India. We are a totally integrated valves manufacturing unit with our own Ferrous & Non Ferrous Foundries, Forging units, state of art Machining and Testing facilities. The company was set- up seven decades ago when India was on the threshold of industrial revolution and there were no good valve manufacturers in the country. It has over the years built up an excellent track record by following the policy of customer satisfaction through continual improvement in Designs, Manufacturing Processes and marketing products that are highly competitive, Safe and Harmless to the environment. We are an ISO-9001:2015 company since Jan 1996 certified by LRQA, India. The company is also licensed to use API Spec 6D , and API 600 monograms. Our Ferrous & Non-Ferrous foundries are PED certified by M/s. LRQA India & AD 2000-Merkblatt WO certified by TUV India. The Foundries are also adjudged as "Well Known FOUNDRY" under Indian Boiler Regulation 4C(2) of Central Boiler Board, Govt. of India. We also have IRS works approval certificate for Ferrous and Non Ferrous Foundry for casting of marine valves in accordance with the relevant requirements of Part 2, Chapter 4 & Chapter 8 of “Rules & Regulations for the Construction & Classification of Steel Ships”. Our valves are certified by “FCRI” for functional and structural integrity for Seismic applications. -          WORKED AS H.O.D & MANAGER (PPE&ASSEMBLY) and DEPUTY MANAGEMENT REPRESENTATIVE(DMR)          IN LVL, JAL &CNC SECTION IN LEADER VALVES LTD.JAL         - AS  SENIOR ENGINEER IN LEADER VALVES LTD,JAL DURING 2001-2003 IN PRODUCTUIN PLANNING &EXECUTION DEPTT.  -AS MANAGER IN LEADER VALVES LTD, JAL IN PPE&ASSEMBLY DEPTT, DURING YEAR 2005 - AS   AE(ASSEMBLY&SUB ASSEMBLY SECTION) DURING YEAR 1995-1996 -  AS PRODUCTION/FORGING   HEAD IN JP STEELS INDS. DURING YEAR 2000
Patents and publications	-            -          (MORE DETAILED LIST ALSO ATTACHED) PUBLICATION OF RESEARCH PAPER ON”Taguchi’s technique used for Optimizing means effective case depth of Induction Hardened material “ IN INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING,VOL3 ISSUEII-,JULY-DEC2010 -            -            -          PUBLICATION OF THESIS ON “SOLAR BED WARMER USING POLYETHYLENE GLYCOL AS PHASE CHANGING MATERIAL(PCM)” www.tesionline.com/intl/myadmin.jsp PUBLICATION OF THESIS ON PSYCHOMETRIC TESTING: CONCEPTUAL FRAMEWORK Thesis ID: 17657 www.tesionline.com/intl/myadmin.jsp PUBLICATION OF THESIS ON MICROELECTROMECHANICAL SYSTEMS (MEMS): A READY VISION TO TECHNOLOGY  THESIS ID:17764 http://www.tesionline.com/intl/thesis.jsp?idt=17764 PUBLICATION OF THESIS ON CHECK VALVE ANALYSIS AND PRIORITIZATION (CVAP) METHODOLOGY AND WEAR PREDICTION. www.tesionline.it/default/tesi.asp?idt=17871 THESIS /DISSERTATION/EDT ON THERMAL BINDING METHODOLOGY AND MODEL DESCRIPTION IN WEDGE GATE VALVES. ingegneria.tesionline.it/ingegneria/tesi.jsp?idt=17714 -SQUARE HOLE DRILLING MACHINE PATENT with TIFAC,DST,GOVT. OF INDIA vide letter no PSCT/1116 DTD16/05/05 IN COEGENATION WITH LOVELY INST, OF TECH.PHAGWARA.(PB) INDIA -TECHNICAL PAPER ON HYBRID ENGINES PUBLISHED IN ISTE TECHNICAL ADDITIONS -PAPER PRESENTATION ON MITIGATION ANALYSIS IN MC POLYTECHNIC.JAL
Additional professional activities&INNOVATIONS	1.PROJECT GUIDE&INNOVATOR TO STUDENTS OF SANT BABA BAGH SINGH COLLEGE OF ENGG&TECH.,PADHIANA(JAL) ON DEVELOPMENT OF CNC FIXTURES. 2. PROJECT GUIDE&INNOVATOR TO STUDENTS OF DAV INST. OF ENGG. &TECH .JAL  ON  DUPLEX TYPE AUTOMATIC BACK SPOT FACING TOOL 3. PROJECT GUIDE&INNOVATOR TO STUDENTS OF LOVELY INSTITUTE OF ENGG. &TECH, PHG  ON PORTABLE PRECISION  HORIZONTAL LAPPING MACHINE&BACK BUSH SEATING LAPPING MACHINE. 4. PROJECT GUIDE  TO DESIGN  OF GEAR BOX 1:32 FOR 30”X150 GT/V TO INDUSTRIAL PROJECT OF GNDEC M TECH. STUDENTS. 5. PROJECT GUIDE TO LIT,PHAGWARA  B TECH. STUDENTS FOR PROJECT ON PNEUMATIC JACK,WON AWARD AT SLIET, SANGRUR.   6. STRUCTURE ANALYSIS  GEAR + MOTOR OPERATED  (GMOV)GLOBE VALVE  USING COSMOS AND ANSYS            Project guide and problem solving during project to MTech (machine design)  course to FATEHGARH SAHIB engg. student      7. STRUCTURE ANALYSIS  OF SWING CHECK VALVE COVER PLATE   USING COSMOS AND ANSYS            Project guide and problem solving during project to MTech (machine design)  course to FATEHGARH SAHIB engg. Student.           8. CHECK VALVE WEAR QUANTIFICATION FOR IMPROVED  COST EFFECTIVENESS AND PLANT RELIABILITY            Project guide and problem solving during project to MTech (PRODUCTION ENGG.)  course to B.C.E.T GURDASPUR  engg. Student.  9. THERMAL BINDING IN WEDGE GATE VALVES&PERIODIC VERIFICATION OF THERMAL BINDING CAPABILITY OF MOTOR OPERATED VALVES  Project guide and problem solving during project to MTech (PRODUCTION ENGG.) course to B.C.E.T GURDASPUR  engg. Student.         10. DESIGN AND FABRICATION OF PLANETARY TYPE LAPPING  VERTICAL    MACHINE FOR  WEGDE  LAPPING                       Project guide &INNOVATER for   project to BTech (MECHANICAL  ENGG.)            course to OF LOVELY INSTITUTE OF ENGG. & TECH, PHAGWARA.        11. DESIGN AND FABRICATION OF DUAL CUTTING STROKE SHAPER                      Project guide &INNOVATER  for  project to DME (MECHANICAL  ENGG.)            course to OF MEHR CHAND POLYTECHNIC STUDENTS YEAR 2007. 12, SOLID MODELLING AND STATIC ANALYSIS ON CI SWING CHECK VALVE CL-125 USING COSMOS Xpress& PRO-E (YEAR 2007)   PROJECT GUIDE TO STUDENTS OF SANT BABA BAGH SINGH COLLEGE OF ENGG&TECH.,PADHIANA(JAL)PUNJAB -INDIA     13. DESIGN AND   ANALYSIS FOR STATIC LOADING ON HYDRAULIC TESTING FIXTURE USING SOLIDWORKS COSMOS 2008   PROJECT GUIDE TO STUDENTS BTECH. OF GURU NANAK DEV ENGG, COLLEGE, LUDHIANA(PUNJAB) YEAR 2008-09       - PUBLICATION OF NAME IN INTERNATIONAL ENGINEERS BIBLIOGRAPHY” WHO IS WHO IN SCIENCE &ENGINEERING”  BY MARQUIS USA  , PUBLISHED IN SEPT 2006 EDITION 2006-2007  -PUBLICATION OF BIOGRAPHY IN (IBC) THE INTERNATIONAL BIOGRAPHICAL CENTRE OF CAMBRIDGE, ENGLAND FOR OUTSTANDING SCEINTISTS OF THE 21ST CENTURY, -2007 EDITION   -LEADING PROFESSIONALS OF THE WORLD SERIES -2007-BIOGRAPHY LISTED AS LEADING ENGINEERS OF THE WORLD 2007 BY IBC,CAMBRIDGE,ENGLAND,2007 PUBLICATION OF BIOGRAPHY IN (ABI) AMERICANBIOGRAPHICAL INSTITUTE,INC INCLUSION IN GREAT MINDS OF THE 21ST CENTURY FOR THE YEAR 2008-09
Professional memberships	(MORE DETAILED LIST ALSO ATTACHED) World Academy of Science, Engineering and Technology Member Scientific Committee and Editorial Review Board on Engineering and Physical Sciences        MEMBER  --INTERNATIONAL SOCIETY OF SCIENTIST, TECHNOCRATS AND ENGINEERS (ISSTE)    MEMBER---INTERNATIONAL SOCIETY OF MECHANICAL AND AUTOMOBILE ENGINEERS (ISMAE)    MEMBER--ASIAN ORGANIZATION OF MECHANICAL ENGINEERING EDUCATIONIST AND SCIENTIST (AOMEES)    MEMBER---SCIENCE SOCIETY OF INDIA (SSI) -MEMBER IAENG (INTERNATIONAL ASSOCIATON OF ENGINEERS) NO. 61861 -MEMBER IET (INSTITUTION OF ENGINEERING AND TECHNOLOGY,UK)ID; 552-92-450 -LIFE MEMBER ISME ( INDIAN SOCIETY OF MECHANICAL ENGINEERING,  LM-1108) -MEMBER  INTERNATIONAL SOCIETY OF MECHANICAL ENGINEERS -  LIFE MEMBER I S TE (INDIAN SOCIETY OF TECH. EDUCATION) - MEMBER IEI  (INSTIITUTION OF ENGINEERS (INDIA) NO. 534575-9 - MEMBER SAE(SOCIETY OF AUTOMOBILE ENGINEERS) NO. 7052300005 - MEMBER IIM  ( INDIAN INSTITUTE OF METALS) - MEMBER IIW   (INDIAN INSTITUTE OF WELDING )DEL/M/R-9312
Languages	ENGLISH,HINDI,PUNJABI,SANSKRIT
Community activities	JOINT SECRETORY JAI DURGE DHARMIC SABHA, DURGA MATA MANDIR MAQSUDAN,JALANDHAR
Extracurricular activities	- COURSE IN “CHEMICAL ANALYSIS OF IRON &STEEL” FROM NITCON, CHD CONDUCTED BY DEPTT. OF SCIENCE&TECH. ,GOVT. OF INDIA ,NEW DELHI.                                                               - COURSE IN “INTERNATIONAL MARKETING “FROM  CIHT,JAL UNDP PROJECT GOVT. OF INDIA. - COURSE IN COMPUTER AIDED DRAFTING AUTOCAD,PRO-E WILDFIRE,SOLIDWORKS,ANSYS - WORKING WITH SOLID MODELLING ON SOLID WORKS,ANALYSIS ON COSMOS-2006, AUTODESK INVENTOR,STAAD PRO., ANSYS - COMPUTER PROFICIENCY IN ELEMENTRY PROGRAMMING, WINDOWS9X,WIN2000, WIN XP, NT WORK STATIONS, PROGRAMMING IN C,FORTRAN-77, OFFICE XP,2000 CORELDRAW, DESIGN 3D-CAD ETC
Interests and activities	IN FIELD OF AUTOMATION IN FLOW AND POWER COTROLS& COMPUTER NUMERICAL CONTROLED (CNC M/C’S),VALVE MANUFACTURING&DESIGN.
Awards received	- WON BEST PROJECT AWARD FROM PUNJAB STATE COUNCIL OF SCIENCE &TECH,CHD(PSCT) ,INDIA,F0R DESIGN AND FABRICATION OF AUTOMATIC NUT TAPPING ATTACHMENT ON DRILLING MACHINE(AUTOMATION OF TAPPING PROCESS) - PROJECT ON “ COSERVATION OF OIL IN OIL FIRED FORGING FURNACE” IN CENTRAL INSTITUTE O HAND TOOLS,JAL REDUCING OIL CONSUMPTION BY 20%. -PROJECT ON “SOLAR BED WARMER USING PARAFFIN WAX  AS A PHASE CHANGING MATERIAL” AT GURUNANAK DEV ENGG COLLEGE, LDH(PB) - AWARD OF MERIT(1ST) IN ALL SEMESTERS IN DIP. IN MECH ENGG.- --MEMBER OF ORGANISING COMMITTEE OF NATIONAL SEMINAR ON COMPUTER BASE MIS HELD AT GNDEC, LDH BEST TECHNICAL EDITOR AWARD DURING COLLEGE - BEST MESS MEMBER AWARDS FROM GNDEC,LDH(PB) - MEMBER NSS UNIT DURING ACADEMICS

 

PERSONAL DETAILS:    NAME:                     GURUDUTT SAHNI

                                        MOTHERS NAME:    SURAJ SAHNI

                                        MARITAL STATUS:   MARRIED

                                        D. O. B:                       26-05-1974

                                        NATIONALITY:          INDIAN(PUNJABI)

 

(GURUDUTT SAHNI)

 

SUBJECT DETAILS GIVEN  AUTHENTIC IN ALL RESPECTS

 

 

Google scholar link	https://scholar.google.co.in/scholar?hl=en&as_sdt=0,5&q=dr+gurudutt+sahni
Scopus link	https://www.scopus.com/results/authorNamesList.uri?sort=count-f&src=al&orcidId=111,   https://orcid.org/0000-0003-1414-3304
Linkedin link	https://in.linkedin.com/in/dr-gurudutt-sahni-c-eng-p-eng-52451a8b
Researchgate link	https://www.researchgate.net/profile/Gurudutt_Sahni
Personal website link	http://DRGURUDUTTSAHNI.website2.me    , https://drguruduttsahni.webs.com http://drguruduttsahniphd.angelfire.com/

 

 

 

 

 

 

 

 

 

PROJECTS DETAILS

 

1.  SQUARE HOLE DRILL MACHINE: (Patent Filed by TIFAC (Technology Information Forecasting & Assessment Council of India), Through PSCST (Punjab State Council of Science & Technology, Chandigarh.)

 

This machine is useful for producing square hole in a single operation. Advantages of this type of machine are: very less operational time, square hole can be produced in a single operation etc. This machine is filed for patent through Punjab State council of Science& Technology, Chandigarh (Letter No. PSCST/1116 Dated 16/05/05).

 

2.   PNEUMATIC JACK:

 

This type of jack is used to lift the vehicles by the use of compressed air. Presently no such type of jack is used in the Indian market. Presented this project in a National Level Techfest (Technical Festival) held at Adesh Institute of Engineering & Technology, Faridkot (Punjab) and one 3^rd prize and 1^st prize at Lala Lajpat Rai Institute of Engineering and Technology, Moga in model making competition with LIT, mechanical students

 

3.   AUTOMATIC LAPPING MACHINE:

 

This project was done for  LIT final year studentsBATCH 2002. This machine is used to lap Globe Valves automatically. Conventionally this work was done manually. Due to this project the productivity of the company gets improved up to 30%. For this achievement Certificate of Appreciation was awarded by Leader Valve Limited, Jalandhar.

 

4.   BACK BUSH LAPPING TOOL:

This is a tool used to lap back bushes and spindles of the Gate Valve as well as Globe Valve individually. Conventionally these were lapped manually. Lapping of back bush and spindle was done simultaneously by inserting both in each other. But due to this operation a defect called Galling (Sharp edges on spindle face) occurs. To avoid this individual lapping of both was required and also not at the cost of time. It was assumed that during individual lapping of both time utilized would be more. But we control the time and also avoid this defect. For this achievement Certificate of Appreciation was awarded by the company i.e. Leader Valve Limited, Jalandhar.

 

5.   BED WARMER:

 

Conventionally electric bed warmer and water heated bed warmers are used in the market. But both have their relative disadvantageous such as in case of electrical bed warmer a magnetic field is produce which affect the human nervous system and require electric energy for its working. Water heated bed warmer also require electric energy to work. But our bed warmer utilizes solar energy for its working and has no side affect on human body. This type of bed warmer utilizes property of latent heat of particular substances(sunnoco-wax) for its working.  The basic principle of this project is that latent heat of a material can be used effectively by controlling the time period of phase change.

      

         6. STRUCTURE ANALYSIS  GEAR + MOTOR OPERATED  (GMOV)GLOBE VALVE  

                USING COSMOS AND ANSYS

           Project guide and problem solving during project to MTech (machine design)

           course to FATEHGARH SAHIB engg. student

 

          7. STRUCTURE ANALYSIS  OF SWING CHECK VALVE COVER PLATE  

                USING COSMOS AND ANSYS

           Project guide and problem solving during project to MTech (machine design)

           course to FATEHGARH SAHIB engg. Student.

        

         8. CHECK VALVE WEAR QUANTIFICATION FOR IMPROVED  COST EFFECTIVENESS      

AND PLANT RELIABILITY

           Project guide and problem solving during project to MTech (PRODUCTION ENGG.)

           course to B.C.E.T GURDASPUR  engg. Student.

         9. THERMAL BINDING IN WEDGE GATE VALVES&PERIODIC VERIFICATION OF

            THERMAL BINDING CAPABILITY OF MOTOR OPERATED VALVES

 

           Project guide and problem solving during project to MTech (PRODUCTION ENGG.)

           course to B.C.E.T GURDASPUR  engg. Student.

    Perform an evaluation of the safety-related power-operated gate valve having operational configurations that may be susceptible to pressurelocking or thermal binding.  Document the basis for determiningwhether  valves (a) are susceptible to pressure locking or thermal binding or (b) can be removed from further consideration.  For example, solid wedge disk gate valves might not be susceptible to pressure locking.  Double disk gate valves are not likely to be susceptible to thermal binding.  The absence of a heat source could be a basis for eliminating valves from consideration of susceptibility to thermally induced pressure

      locking.

 

 

      10. DESIGN AND FABRICATION OF PLANETARY TYPE LAPPING  VERTICAL   

MACHINE FOR  WEGDE  LAPPING 

          

          Project guide &INNOVATER for   project to BTech (MECHANICAL  ENGG.)

           course to OF LOVELY INSTITUTE OF ENGG. & TECH, PHAGWARA.

 

     11. DESIGN AND FABRICATION OF DUAL CUTTING STROKE SHAPER

          

          Project guide &INNOVATER  for  project to DME (MECHANICAL  ENGG.)

           course to OF MEHR CHAND POLYTECHNIC STUDENTS YEAR 2007.

12, SOLID MODELLING AND STATIC ANALYSIS ON CI SWING CHECK VALVE CL-125 USING COSMOS Xpress& PRO-E (YEAR 2007)

 

PROJECT GUIDE TO STUDENTS OF SANT BABA BAGH SINGH COLLEGE OF ENGG&TECH.,PADHIANA(JAL)PUNJAB -INDIA

 

 

13. DESIGN AND   ANALYSIS FOR STATIC LOADING ON HYDRAULIC TESTING FIXTURE USING SOLIDWORKS COSMOS 2008

 

PROJECT GUIDE TO STUDENTS BTECH. OF GURU NANAK DEV ENGG, COLLEGE, LUDHIANA(PUNJAB) YEAR 2008-09

 

 

14, SOLID MODELLING AND STATIC ANALYSIS ON CAST STEEL API600 WEDGE GATE VALVE  USING SOLIDWORKS& ANSYS WORKBENCH

 

          Project guide &INNOVATER for   project to BTech (MECHANICAL  ENGG.)

           course to OF LOVELY INSTITUTE OF ENGG. & TECH, PHAGWARA.YEAR 2010

 

 

 

 

 

 

 

 

 

 

 Technical paper published and Patents

NAME: GURUDUTT SAHNI

Title of the Paper	Name of Journal in which Published	Date of Publication
PUBLICATION OF RESEARCH PAPER ON” Taguchi technique used for Optizing means effective case depth of Induction Hardened material”	IN INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING, VOL 3 ISSUE II	JULY-DEC 2010
Paper on “ Study Flow characteristics around disc design for butterfly valve”	Proceeding of National Conference on Advances in mechanical engineering	Feb 2010
Optimization of department of hardening in Induction Hardening  Process using Fuzzy Logic Technique	The Technology World Quarterly Journal.Vol, IV issue I	March-April 2010
SQUARE HOLE DRILLING MACHINE	PATENT with TIFAC,DST,GOVT. OF INDIA vide letter no PSCT/1116 DTD 16/0505 IN COEGENATION WITH LOVELY INST, OF TECH. PHAGWARA.(PB) INDIA	Sept 2010
HVOF coating of CoNiCrAIY allow onto AISI 304L SS,AISI 316 SS and EN 8 steel surfaces: Slurry erosion testing.	INTERNATIONAL JOURNAL OF SCIENCE And TECHNOLOGY,VOL 3 ISSUE II	Jan 2011
Effect of Composition of Power Mixed Dielectric Fluid on Performance of Electric Discharge Machining	INTERNATIONAL JOURNAL OF SCIENCE And TECHNOLOGY,VOL 3 ISSUE II	jan 2011
PUBLICATION OF THESIS ON “SOLAR BED WARMER USING POLYTHYLENLE GLYCOL  AS PHASE CHANGING MATERIAL(PCM)”	www.tesionline.com/intl/myadmin.jsp	Feb 2006
PUBLICATION OF THESIS ON PHYCHOMETRIC TESTING:CONCEPTUAL FRAME WORK Thesis ID:17657	www.tesionline.com/intl/myadmin.jsp	June 2005
PUBLICATION OF THESIS ON MICROELECTRO MECHANICAL SYSTEM(MEMS):A READY VISION TO TECHNOLOGY THESIS ID:17764	http://www.tesionline.com/intl/thesis.jsp?idt=1                          7764	Dec  2006
PUBLICATION OF THESIS ON CHECK  VALVE ANALYSIS AND PRIORITIZATION(CVAP) METHODOLOGY AND WEAR PREDICTION.	www.tesionline.it/default/tesi.jsp?idt=17871	Dec  2006
RESEARCH THESIS/DISSERTATION/EDT ON THERMAL BINDING METHODOLOGY AND MODEL DESCRIPTION IN WEDGE GATE VALVES.	www.tesionline.it/ingegneria/tesi.jsp?idt=17714	June  2007
Modelling and simulation of gain scheduled controller based pmsm(permanent-magnet synchronous motor) dri ve.	www.tesionline.com/int/indepth.jsp?id=511	May 2007
Advantageous  solution  for wireless personel area network using ultrawindeband technology(uwb)	www.tesionline.com/int/indepth.jsp?id=386	May  2007
Study on Trends f or Hardfacing on Lower Base Materials for Better Performance(Vol.3 No. 1 2012)	International Journal Of  Manufacturing Technology and Industrial Engineering	May2012

 

Analysis of surface Coating On Wedge Type Gate Valve Seating Face And Its Improvement     A REVIEW ON RAMAN EFFECT ITS APPLICATIONS AND SPECTRUM & TO STUDY INFRARED AND RAMAN SPECTROSCOPY   Dr GURUDUTT SAHNI and BALPREET SINGH    2014

International Journal Of  Material Science And Engineering(Vol.4 No. 1 ,2012)     International Journal of Mechanical Engineering & Technology (IJMET) 29-4-2014 Volume 5, Issue 4, April (2014),

2012       2014

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

BREIF BIBLIOGRAPHY

 

DR PROF.(Ing) GURUDUTT SAHNI

 

 PHD(MECH ENGG.),MBA, DOCTORATE IN MANAGEMENT STUDIES,POST DOCTORAL(MECH. ENGG.)

                                                                        CHARTERED ENGINEER.(IEI) INDIA &QMS LEAD AUDITOR(IRCA  TR.),CHARTERED VALUER, Int PE

   ,                                                                     PROFESSIONAL ENGINEER (PEngg)

                                                                           (REGISTRATION WITH REGISTER  OF BOARD OF PROFESSIONAL ENGINEERS BRPE & CIDC),LIFE EXECUTIVE MEMBER(COUNCIL OF 

                                                                          ENGINEERS&VALUERS), FELLOW-ISME,LIFE MEMBER(EUROSCIENCE), FELLOW-ICC(INTERNATIOAL COUNCIL OF COUNSULTANCY) FM/ICC/555

                                                                       FELLOW (IRED), MIAENG, LIFEMEMBER (INTERNATIONAL ASSOCIATION OF MECHANICAL ENGINEERS)

 

FELLOW-ICC  (INTERNATIONAL COUNCIL OF CONSULTANCY)

                                                                        MISIE,MMISOM, EIOSRD,, FELLOW- ASR(ASIA SOCIETY OF RESEARCHERS), SIOSRD, MEMBER (INTERNATIONAL SOCIETY OF ENGINEERS),                                                                                                         LIFE TIME MEMBER(TERA)&(HBSRA)& LIFE MEMEMBER (STRA)EURASIA RESEARCH(SCHOLARLY ASSOCIATION),MIAAM-SWEEDEN,

 

PUBLICATIONS:

Journal Publications NATIONAL & INTERNATIONAL- 45

      Member Scientific Committee and Editorial Review Board on Engineering and Physical Sciences IN International Conferences :22 International Conferences -12

National conferences -          8

No OF PATENTS:        4

NO. OF MTECH THESISCOMPLETED AS  -GUIDE OF  RESEARCH SCHOLARS  AS INDUSTRIAL GUIDE:    12

NO. OF TRAININGS AND PROJECTS TO NATIONAL&INTERNATIONAL STUDENTS:  MORE THAN 60

       NO. OF EDITORIAL /REVEIW BOARD MEMBER:   44

Membership of  Engineering Institutions/Societies/CORPORATE MEMBERSHIPS/FELLOWS: 28

 

SUBJECT SPECIALIZATION FOR ACADEMICS AND PROFESSIONALS:

THERMAL ENGINEERING, FLUID ENGINEERING, INDUSTRIAL ENGINEERING, DESIGN  OF MECHANICAL MACHINE ELEMENTS,

METALLURGY,FORGING PROCESSES

CAD/CAM,,

CPD/EDP/MPD/PDH DETAILS (CURRENT) :-72

NO. OF AWARDS  NATIONAL/INTERNATIONAL:- 13

 

Google scholar link	https://scholar.google.co.in/scholar?hl=en&as_sdt=0,5&q=dr+gurudutt+sahni
Scopus link	https://www.scopus.com/results/authorNamesList.uri?sort=count-f&src=al&orcidId=111,   https://orcid.org/0000-0003-1414-3304
Linkedin link	https://in.linkedin.com/in/dr-gurudutt-sahni-c-eng-p-eng-52451a8b
Researchgate link	https://www.researchgate.net/profile/Gurudutt_Sahni
Personal website link	http://DRGURUDUTTSAHNI.website2.me    , https://drguruduttsahni.webs.com http://drguruduttsahniphd.angelfire.com/

 

 

Journal Publications

 

1.          Sahni, Gurudutt,.Singh, B., , Kohli, A., “Design of Planetary Gear to use it for Lapping of Wedge of Gate Valve and its benefits over other Gear Mechanism”, International Journal of Research in Engineering & Technology, ISSN(E): 2321-8843, Vol. 3, Issue 8, 2015 (Impact factor (JCC): 1.9586).

2.          Sahni, Gurudutt,.Singh, B. , “Behavior Analysis of Stainless Steel Globe Valve under Different Temperature Conditions”, published in International Journal of Engineering and Innovative Technology, Vol.3, Issue10, 2014.

3.          Sahni, Gurudutt,.Singh, B. ., “FEA Simulation Thermal Analysis of Induction Hardening Process in Case of AISI 1040 Steel”, International Journal of Engineering and Innovative Technology, ISSN 2277-3754, Vol. 4, Issue 2, 2014 (Impact factor:  1.895).

4.          Sahni, Gurudutt,.Singh, B.., Kohli, A., “Induction Hardening Process Using AISI 1040 Steel Material on Samples of ASTM A 370-97 (E18) and E70-97 (E10) Standard and its Benefits”, International Journal of Engineering and Innovative Technology, ISSN 2277-3754, Vol. 4, Issue 2, 2014 (Impact factor:1.895)

5.          Sahni, Gurudutt,.Singh, B., ., “To increase Wear Resistance of Surface Material by Providing the Best Combinations of Factors using Two Factorial Design of Experiment Method on Seating Surface of Industrial Valves”, published in International Research Journal of Management Science and Technology, ISSN 2250-1959, Vol. 5, Issue 4, 2014 (Impact factor = 0.83).

6.          Sahni, Gurudutt,.Singh, B., , “Optimization using Taguchi method and its merits in solving Industrial Problems by taking a valid example for Controlling Wear in Industrial Valves”, International Research Journal of Management Science and Technology, ISSN 2250 – 1959,Vol. 5, Issue 3, 2014 (Impact factor = 0.83).  

7.          Sahni, Gurudutt,.Singh, B., , “To perform the Structural Analysis on Wedge type Gate Valve and its Optimization using FEA”, International Research Journal of Management Science and Technology, Vol. 5, Issue 5, ISSN 2250-1959, 2014 (Impact factor = 0.83).  

8.          Sahni, Gurudutt,.Singh, B., ., “To investigate Water Hammering and Cavitation phenomena in Pipeline and methods to reduce the same”, International Research Journal of Management Science and Technology, ISSN 2250-1959, Vol. 5  Issue 6,  2014. 

9.          Sahni, Gurudutt,.Singh, B., ., “To study the Characteristics of Duplex Stainless Steel and its performance as Corrosion Resistant Material for Industrial use in Highly Corrosive Environment”, International Research Journal of Management Science and Technology, ISSN 2250-1959, Vol. 5, Issue 7, 2014.  

10.      Sahni, Gurudutt,.Singh, B., . “To evaluate Techniques in Sealing Arrangement for Different Valves for Better Performance”, Research Journal of Science Engineering and Technology”,  ISSN 2250-1959, Vol. 4, Issue 1, 2014 (Impact factor = 0.78).

11.      Sahni, Gurudutt,.Singh, B., . “Modern Techniques, Trends and Evaluation for Design Optimization of Swiveled Plug Type Globe Valve”, Research Journal of Science Engineering and Technology, ISSN 2250-1959, 2014 (Impact factor = 0.78).

12.      Sahni, Gurudutt,.Singh, B., “A Review on Raman Effect, its Applications and Spectrum  &  to  Study  Infrared  and Raman Spectroscopy”, International  Journal  Of  Mechanical Engineering & Technology (IJMET), Vol. 5, Issue 4, 2014 (Impact factor = 7.5377)

13.      Sahni, Gurudutt,.Singh, B.., “To Study and Predict Methods to Reduce Thermal Binding and Pressure Locking in Wedge Type Gate Valve”, Research Journal of Science Engineering and Technology, ISSN 2250-1959 (online),Vol. 4,  Issue 1, 2014.  

14.      Sahni, Gurudutt,.Singh, B.., Singh, H., “Modification in Manufacturing Process of rod k24 leading to reduction in overall manufacturing cost by SPM, New Bending & Chamfering Operation” International Journal of Engineering and Innovative Technology, ISSN 2277-3754, Vol. 4, Issue 1, 2014 (Impact factor = 1.895).

15.      Sahni, Gurudutt,.Singh, B.., “To Reduce Heat Dissipation Rate During Seal Welding Body Rings of Valves, Problem Formulation and Its Solutions”, Research Journal Of Science Engineering and Technology, ISSN 2250-1959,Vol. 3, Issue3, 2013.

16.   Sahni, Gurudutt,.Singh, B., “To study and review (wear, lubrication, movement) and its optimization on various material parts of Industrial Valve”, Research Journal of Science Engineering and Technology, ISSN 2250-1959 (online), Vol. 3, Issue 4, 2013 (Impact  factor = 0.78).

 

 

HIGHEST IMPACT FACTOR TILL KNOW 7.51&1.859 WITH AN ISO 9001:2008 PUBLICATION

1.INTERNATIONAL JOURNAL OF ENGINEERING AND INNOVATIVE TECHNOLOGY ISSN 2277-3754 ISO 9001:2008 CERTIFIED IMPACT FACTOR OF 1.895

ONLINE ADDRESS

http://ijeit.com/Vol%203/Issue%2010/IJEIT1412201404_23.pdf

VOLUME3 ISSUE10 APRIL 2014

AUTHORS-DR GURUDUTT SAHNI

TITLE- Behaivour analysis of stainless steel globe valve under different temperature conditions

 

2. INTERNATIONAL  JOURNAL  OF  MECHANICAL ENGINEERING & TECHNOLOGY (IJMET) Journal Impact Factor (2014):  7.5377

 ISSN Print:   0976 – 6340

 ISSN Online:  0976 - 6359

ONLINE ADDRESS

http://www.iaeme.com/IJMET.asp

ARTICLE NO 10 ID 30120140504010

VOLUME 5 ISSUE 4 APRIL 2014

AUTHORS-DR GURUDUTT SAHNI

Paper Title :A REVIEW ON RAMAN EFFECT ITS APPLICATIONS AND SPECTRUM  &  TO  STUDY  INFRARED  AND  RAMAN SPECTROSCOPY

 

INTERNATIONAL CONFERENCES

INTERNATIONAL CONFERENCE

1. INTERNATIONAL MULTI TRACK CONFERENCE ON SCIENCES, ENGINEERING & TECHNICAL INNOVATIONS (IMTC-14) ORGANIZED BY CTIEMT, JALANDHAR ON JUNE 3 & 4, 2014

AUTHORS:DR GURUDUTT SAHNI

PAPER ID IMT2ME001

 PAPER TITLE TO INVESTIGATE STRESSES AND DEFORMATION ANALYSIS IN SKELETOMUSCULAR REGIONS WHILE SITTING NPOSITIONS USING FEM 

 

 

2 INTERNATIONAL MULTI TRACK CONFERENCE ON SCIENCES, ENGINEERING

& TECHNICAL INNOVATIONS (IMTC-15) ORGANIZED BY CTIEMT&PTU,JAL,

JALANDHAR ON JUNE 22 & 23, 2015

 

3 AUTHORS:DR GURUDUTT SAHNI,BALPREET SINGHTOPIC: PERFOMANCE

TECHNIQUES FOR OPERABILITY OF REGULATING GLOBE VALVE AND

ITS FUNCTIONING

 

4 INTERNATIONAL MULTI TRACK CONFERENCE ON SCIENCES, ENGINEERING

& TECHNICAL INNOVATIONS (IMTC-15) ORGANIZED BY CTIEMT&PTU,JAL,

JALANDHAR ON JUNE 22 & 23, 2015

AUTHORS:DR GURUDUTT SAHNI,BALPREET SINGH

TOPIC: OPTIMIZATION OF GATE VALVE WITH NEW WEDGE DESIGN

AND TO STUDY EFFECT OF VARYING TEMPERATURE

 

5. Sahni,DR GURUDUTT.,Singh, B. Saini, S., Singh. M., “Optimization using Taguchi method in solving Industrial Problems by Controlling Wear in Industrial Valves”, published in ICSETI 2016 International conference on Sciences Engineering & Technical Innovations, CTIEMT, Jalandhar June 3^rd- 4^th, 2016.

 

6.Gurudutt Sahni ,Shubham Sharma, Jujhar Singh, Munish Mehta, and S.K. Mahla            “Comprehensive research on comparing the engine performance and emission characteristics of diesel with fatty acid methyl ester of Pongamia Pinnata biodiesel blends fuelled in a single cylinder Kirloskar diesel engine”  in

 INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS ENERGY & ENVIRONMENTAL SUSTAINABILITY (ICAMEES-2018)

 

icamees2018, scopus,ELSEVIER(materials today proceedings) based international conference 

 

 

NATIONAL CONFERENCE

 

1.PRESENTED PAPER ON 2^nd NATIONAL CONFERENCE ON 5^TH APRIL 2014 AT   ST SOLDIER INSTITUTE OF ENGG & TECH.

AUTHORS :,DR GURUDUTT SAHNI

PAPER TITLE : THE EFFECT OF THERMAL STRESSES ON GATE VALVE AND ITS OPTIMIZATION USING FEA ANALYSIS.

ONLINEADDRESS: https://docs.google.com/file/d/0B6teGEZJafTga25abFEwVEZjbTA/edit?pli=1

 

2, Sahni, GURUDUTT,.Singh, B., , Kohli, A., “Structural Analysis of Crane Hook using Finite Element Analysis (FEA)”, DAV National Congress on Science, Technology & Management, Jalandhar, Nov, 2014. 

 

3, ,Sahni ,GURUDUTT  Singh, B., ., Kohli, A., “Flow Simulation Analysis of L-Shaped Pipe of Stainless Steel Material”, DAV National Congress on Science, Technology & Management, Jalandhar, Nov, 2014.

 

4, Sahni, GURUDUTTSingh, B., , Singh, H., “Reduction in Overall Manufacturing Cost by SPM, New Bending & Chamfering Operations of ROD K24”, DAV National Congress on Science, Technology & Management, Jalandhar, Nov, 2014.

 

5 Sahni, GURUDUTTSingh, B.,., “The Effect of Thermal Stresses on Gate Valve and its Optimization using FEA” Presented paper on 2^nd National Conference at St. Soldier Institute of Engg. & Tech. Jalandhar, April 2014.

 

 

 

OTHER PUBLICATIONS IN INTERNATIONAL PROCEEDINGS

 

Gurudutt Sahni Amit Kohli

, Hari Singh , “Optimization of Depth of Hardening in Induction HardeningProcess using Fuzzy Logic Technique” Journal of Technology

World (International Journal Division, Kuala Lumpur, Malaysia),

Vol. 5 (1), 2010, pp. 195-200.



  Gurudutt Sahni, Amit Kohli, Hari Singh and  “Taguchi’s Technique forOptimizing Mean Effective Case Depth of Induction Hardened Material”,

International Journal of Mechanical Engineering,

Vol.3 (2), 2010, pp. 269

 

 

1. INTERNATIONAL MULTI TRACK CONFERENCE ON SCIENCES, ENGINEERING

& TECHNICAL INNOVATIONS (IMTC-15) ORGANIZED BY CTIEMT&PTU,JAL,

JALANDHAR ON JUNE 22 & 23, 2015

       AUTHORS:DR GURUDUTT SAHNI,BALPREET SINGHTOPIC: PERFOMANCE

      TECHNIQUES FOR OPERABILITY OF REGULATING GLOBE VALVE AND

      ITS FUNCTIONING

 

2. INTERNATIONAL MULTI TRACK CONFERENCE ON SCIENCES, ENGINEERING

& TECHNICAL INNOVATIONS (IMTC-15) ORGANIZED BY CTIEMT&PTU,JAL,

JALANDHAR ON JUNE 22 & 23, 2015

AUTHORS:DR GURUDUTT SAHNI,BALPREET SINGH

TOPIC: OPTIMIZATION OF GATE VALVE WITH NEW WEDGE DESIGN

AND TO STUDY EFFECT OF VARYING TEMPERATURE

 

 Sahni,DR GURUDUTT.,Singh, B. Saini, S., Singh. M., “Optimization using Taguchi method in solving Industrial Problems by Controlling Wear in Industrial Valves”, published in ICSETI 2016 International conference on Sciences Engineering & Technical Innovations, CTIEMT, Jalandhar June 3^rd- 4^th, 2016.

 

3.IMPACT: International Journal of Research in Engineering &

Technology

(IMPACT: IJRET) ISSN(E): 2321-8843; ISSN(P): 2347-4599 Vol. 3, Issue 8,

Aug 2015, 1-6

Impact Factor(JCC): 1.9586

3. AUTHORS:DR GURUDUTT SAHNI,BALPREET SINGH

 

TOPIC:  A REVIEW ON OPTIMIZATION OF GATING SYSTEM IN METAL CASTING

 GURUDUTT SAHNI, SANDEEP SINGH, LAKHWINDER PAL SINGH

IMPACT: International Journal of Research inEngineering & Technology (IMPACT: IJRET)

ISSN (P): 2347-4599; ISSN (E): 2321-8843

Vol. 4, Issue 6, Jun 2016, 21-26

© Impact Journals

 

 

 

 

 

 

 

 

 

PATENTS

1.Title of the invention : DESIGN & DEVELOPMENT OF EQUIBRATED TYPE DISC FOR

REGULATING TYPE GLOBE VALVES FOR LARGE SIZE AND ITS OPTIMISATION USING

FEA (ANSYS))

INVENTOR ---DR(PROF) GURUDUTT SAHNI

BALPREET SINGH

PATENT APPLICATION

PUBLICATION

Application No.1594/DEL/2015 A

INDIA

Date of filing of

Application :03/06/2015

Publication Date : 26/06/2015

 

2 (54) Title of the invention : DESIGN & DEVELOPMENT OF HIGH CAPACITY GEAR. ASSEMBLY USED FOR LARGE SIZE HIGH TORQUE INDUSTRIAL VALVES

 (12) PATENT APPLICATION PUBLICATION

(21) Application No.201611013361 A

(19) INDIA

(22) Date of filing of Application :18/04/2016

(43) Publication Date : 13/05/2016

(71)Name of Applicant : 1)DR. GURUDUTT SAHNI Address of Applicant :154,KAPURTHALA ROAD,NEAR PATELCHOWK JALANDHAR CITY-144008(PUNJAB) Punjab India 2)DR.SANJEEV SAINI 3)BALPREET SINGH KALRA 4)AMANDEEP SINGH 5)KARAMDEEP SINGH

(72)Name of Inventor : 1)DR.GURUDUTT SAHNI 2)DR. SANJEEV SAINI 3)BALPREET SINGH KALRA 4)AMANDEEP SINGH 5)KARAMDEEP SINGH

 

 

3)

(54) Title of the invention : DESIGN & FABRICATION OF HEXAGONAL CUTTING LATHE MACHINE

 

(12) PATENT APPLICATION PUBLICATION

(21) Application No.201611013360 A

(19) INDIA

(22) Date of filing of Application :18/04/2016

(43) Publication Date : 13/05/2016

(71)Name of Applicant : 1)DR.SANJEEV SAINI Address of Applicant :63/3,FRIENDS COLONY,OPP.DAV COLLEGE JALANDHAR CITY-144008(PUNJAB) Punjab India 2)KARAMDEEP SINGH 3)JAGROOP SINGH 4)DR. GURUDUTT SAHNI 5)BALPREET SINGH KALRA

(72)Name of Inventor : 1)DR. SANJEEV SAINI 2)KARAMDEEP SINGH 3)JAGROOP SINGH 4)DR.GURUDUTT SAHNI 5)BALPREET SINGH KALRA

 

 

 

 

 

 

AWARDS/PROFESSIONAL RECOGNISATION

 

1”Innovative Technological Research &

Dedicated Academician Achievement Award” (Mechanical Engineering)

Innovative Scientific Re search Profe ssional Malaysi a  &

The Society of Innovative Educationalist & Scientific Research Professional Chennai,2019

 

2.”LIFE TIME ACHIEVEMENT AWARD” FROM International Organization of Scientific Research and Development

IOSRD 2018

 

3 “EMINENT SCIENTIST AWARD” FROM IOSRD International Organization of Scientific Research and Development

IOSRD 2018

 

4 BEST RESEARCHER AWARD FROM ASIAN SOCIETY OF RESEARCHERS (ASR) HONG KONG,2019

 

5. Awarded – “Best Professor Of The Year 2020”by  Innovation and knowledge Excellence (Global Awards)  in the field of engineering on 16 Aug. 2020

 

6.Awarded – “Distinguished Researcher Award Of The Year”2020 by  Innovation and knowledge Excellence (Global Awards)  in the field of engineering on 16 Aug. 2020

 

7.

2162APP.No.201920R07 SFSIESRP AWARDED “Innovative Principal Scientist & Dedicated Excellent Educationalist Award “ Specialization: Mechanical Engineering Dr.(Prof.) Gurudutt Sahni, Ph.D.,  Organized by The society of Innovative Educationalist & Scientific Research Professional Accredited with Innovative Scientific Research Professional Malaysia ,Sdn Bhd

 

 

8. AWARDED

“ BEST RESEARCHER AWARD “

In the 10th International Scientist Awards on Engineering, Science and Medicine, held on 26 & 27-Sep-2020,

Hyderabad, India, Organized by VDGOOD Professional Association.

 

9.      AWARDED "Excellence in Innovation" of "2nd International Research Awards on Science, Health and Engineering".International Research Awards, ScienceFather : https://x-i.me/reg

 

10.  AWARDED “ Most Innovative Researcher “the iERP awards 2020. iERP Awards are jointly organized by International Society for Holistic Dentistry (ISfHD) and International Society for Contemporary Medical Research (ISfCMR) – Registered with Government of India. 

 

11. AWARDED "Excellence in Innovation" for the event "2nd International Research Awards on Science, Health and Engineering".SCIENCE FATHER , SHEN 2020 AWARDS ,

ScienceFather is a trademark of Scifax company (Reg. No. 130116), Approved and Registered by Ministry of Corporate Affairs (MCA), Govt. of India.

 

 

CPD/EDP/MPD/PDH DETAILS (CURRENT)

 

1.

ORGANIZED BY INSPIRAJAIPUR INDIA

 

2. HAS SUCESSFULLY PARTICIPATED IN A NATIONAL WEBINAR ORGANIZED BY INSPIRA RESEARCH ASSOCIATION (IRA), JAIPUR ON “CRYPTOCURRENCIES: REDEFINING THE FUTURE OF ECONOMIES “.

 SATURDAY, JULY 11, 2020

 

3. PARICIPATION IN WEBINAR ON “DURABILITY OF CONCERETE`` HELD FOR “COUNCIL OF ENGINEERS & VALUERS'' ON 05.07.2020

 

4.      SUCESSFULLY COMPLETING THE QUIZ ON INSOLVENCY AND BANKRUPTCY CODE . CONDUCTED BY INSOLVENCY AND BANKRUPTCY BOARD OF INDIA & MY GOVERMENT “05.05.2020''

 

5.      PARTICIPATION IN FOUR DAY NATIONAL WEBINAR SERIES “LATEST TRENDS IN BUILDING CONSTRUCTION AND MAINTENANCE'' ASSOCIATION OF CONSULTING CIVIL ENGINEERS (INDIA) CHENNAI CENTRE.

6.       PARTICIPATION IN PRESENTATION “USE OF MICRO MATERIALS IN CONCRETE'' CONDUCTED BY  QCRETE READYMIX(INDIA) PVT. LTD.

            CONDUTED DATED  JULY 3, 2020

7.        PARTICIPATION IN PRESENTATION “NATIONAL WEBINAR ON JUURNEY OF DURABLE RIGID PAVEMENT''  CONCRETE'' CONDUCTED BY ULTRA TECH CEMENT LTD. JULY 25,2020

8.        Participated In the CIAC Webinar-"Challenges of BREACHES on BreachofContractu/s 34 of Arbitration & Conciliation (Amendment) Act 1996 & its Laws "held on Monday 29^th June 2020 at 10.10 hrs to 11.00 hrs CONDUCTED BY Construction Industry Arbitration Council

9.         PARTICIPATION IN PRESENTATION (Effective use of concrete for RCC structures)CONDUCTED BY  QCRETE READYMIX(INDIA) PVT. LTD.CONDUTED DATED  JULY 10, 2020

10.        PARTICIPATION IN PRESENTATION Expert Lecture on "Misconceptions and Facts about Readymix Concrete"CONDUCTED BY Indian Concrete Institute-Bangalore centre DATED  JULY 25, 2020

 

11.     participation in the online Quiz on “Bharat Stage-6 Emission Norms", on July 24, 2020  Organized by Automobile Club of Amritsar College of Engineering and Technology, Amritsar.

12.     Participated in the International Webinar on “Online Education: Issues and Challenges” 18-19 July, 2020 in the academic auspices of Guru Gobind Singh Indraprastha University, New Delhi and organised by DR CBS Cyber Security Services LLP, India.

13.  participated in the On-line Executive Development Program On Projec Risk Management * Organized by Construction Industry Development Council On 24th June, 2020

          14  HAS SUCESSFULLY PARTICIPATED IN A NATIONAL WEBINAR ORGANIZED BY INSPIRA RESEARCH ASSOCIATION (IRA), JAIPUR ON “ENHANCING SOFT SKILLS & EMOTIONAL INTELLIGENCE: NEED OF THE HOUR''. JULY 19, 2020

15.  Participated in International Webinar on “E-Business and Cyber Security” organised by DR CBS Cyber Security Services LLP in Academic Association with Faculty of Commerce and Management Studies, Jai Narain Vyas University, Jodhpur & Indian Accounting Association, Jodhpur Branch on June 27-28, 2020. Prof. Krishn A. Goyal Faculty of Commerce and Management Studies Jai Narain Vyas University, Jodhpur

16.     Participated THE WEBINAR ON “Effective use of concrete in RCC structures” July 11, 2020 QCRETE READYMIX (INDIA) PVT LTD   

17.   Participated THE WEBINAR ON“Understanding Metakaolin July 20,  2020QCRETE READYMIX (INDIA) PVT LTD    

18.         Participated in the one week online short term course on “Additive Manufacturing With Interdisciplinary Application'' organized by DR. B.R. Ambedkar National Institute of Technology, Jalandhar, India from 29 July 2020 under TEQIP-III           

19.  Participated in the one week online short term course on “Industry 4.0 and Smart Manufacturing Opportunities and Challenges'' organized by DR. B.R. Ambedkar National Institute of Technology, Jalandhar, India from 20-24 July 2020 under TEQIP-3

20.       Participated the Webinar on “Current Trends in the internet and Wireless Communication Technologies'' organized by Department of  CSE, DAV Institute of Engineering & Technology,Jalandhar on July 17,2020

21.  For proactive participation in the online “AUTO QUIZ 2020” ,on July 17,2020 Organized by SAEINDIA Collegiate Club of Amritsar College of Engineering and Technology, Amritsar. 

22.    The Valve Manufacturers Association,USA One (1) Professional Development Hour (PDH) for attending Cyber Securing Your Mined Bytes A VMA Webinar July 7, 2020

23.  The Valve Manufacturers Association awards Dr Prof Gurudutt Sahni One (1) Professional Development Hour (PDH) for attending Valve Design and Test Standards A VMA Webinar July 23, 2020

24.   Participated webinar on ''Do we require an Engineer's Bill The way forward for Engineers'' Dated June 20,2020 Organized by Engineering Council Of India   

25.         The Valve Manufacturers Association,USA One (1) Professional Development Hour (PDH) for attending  Valve Design and Test Standards A VMA Webinar July 23, 2020                

             26  Participated in the National Webinar organized by Construction Industry               Development Council & Engineering Council of India in  association with                     Department of Civil Engineering Buddha      Institute of Technology, Gorakhpur on               GIS in Construction Date: 18th July, 2020

27.  Participated in the National Webinar organized by Construction Industry Development Council & Engineering Council of India in association with Vikas Institute of Engineering & Technology, Gorakhpur On Technology for Smart Transportation Date: 25th July, 2020

28.  Participated in the National Webinar Organized by Construction Industry Development Council & Engineering Council of India in association with Association of Civil Engineers Madan Mohan Malaviya University of Technology Gorakhpur On Construction Site Management General Works Supervision Date: 01st August, 2020

29.    FOR ATTENDING THE WEBINAR ON “Viewing Personified Concrete”August 1, 2020  QCRETE READYMIX (INDIA) PVT LTD

30.   Participated and completed 7 days international online faculty development program (FDP) & management development program (MDP) on ''Life Management & Development Research Skills'' organized by inspira research association (IRA), Jaipur on 24-30 July, 2020

31.   Participated in the CIAC Webinar- "Enforcement of Foreign  Award -its Pre- requisite, Implications & Remedies Wednesday, 29th July 2020

32.  Participated in the National Webinar Organized by Construction Industry Development Council & Engineering Council of India in association with Association of Civil Engineers Madan Mohan Malaviya University of Technology Gorakhpur On ``Construction Site Management Camp Operations '' Date: 08th August, 2020

33. Attended ETCIO  Webinar:'' Insights into strengthening your security protection, detection and remediation ''on Wed, 12 Aug 2020  Economic Times

34 . Technical Talk cum Webinar on the TOPIC “Advancing in Manufacturing Materials & Metallurgy” on 10th August, 2020he Institution of Engineers (India)Punjab & Chandigarh State Centre

35. Attended ''Humanizing Technology, the Present & Future of People Analytics'' Asia's Largest HR & WorkTech Conference  Wed, 12 Aug 2020

36. Webinar is being organized, in collaboration with IE Malaysia under the aegis of FEIAP Standing Committee of Information and Communication Technologies (FEIAP-ICT),   .‘SMART LEARNING: A NEW PARADIGM’Date & Time (IST) : 10 AUG 2020

   37. ATTENDED THE WEBINAR ON “Our Experiences with FlyAsh” August 08,                   2020 QCRETE READYMIX (INDIA) PVT LTD

38.  ATTENDING THE WEBINAR ON “Signature Bridge at Delhi, Planning and Design” August 17, 2020 QCRETE READYMIX (INDIA) PVT LTD

39.  attended webinar by  ETCIO-McAfee Inspira || “Maximising Efficiency & Security by Adopting SASE Framework “|| 18th Aug 2020

 

40. ATTENDED IEI Centenary Technical Webinar on “Draft EIA Notification 2020-Highlights and Challenges”BYThe Institution of Engineers (India)dated 06 .08.2020

41.  Attended Cyber Security : A Critical Skill to Protect Your Business, A TECHNICAL TALK WEBINAR ORGANISED BY IEI(INDIA) ON 21 AUG 2020

       42.  Participated in the CIAC Webinar- Appointment of Arbitrators u/s 11 of                  Arbitration & Conciliation (Amendment) Act 2019 –Challenges, Limitations, Powers

             & Legal Position on Wednesday 19th August, 2020

       43 ATTENDED THE WEBINAR ON “Signature Bridge at Delhi, Planning and      Design” August 17, 2020 QCRETE READYMIX (INDIA) PVT LTD

44.  Participated the One Week Online Short Term Course on “Reliability, Maintainability and Quality Issues in Process Industries” Organized at Dr. B. R. Ambedkar National Institute of Technology, Jalandhar, India from 04- 08 August, 2020 under TEQIP-3.

45.   participated in 5 DAYS WEBINAR on Liaisoning in Construction Projects Date: August 10, 2020 to August 14, 2020

46.  The Society of Engineers – UAE certify that  successfully participated in the webinar اFuture threats to the engineering sector That was held on 1st July 2020  Ref/SOE/DXB/SE/20/8585

47 attended ETAuto Masterclass on Systems Engineering and Simulation for interdisciplinary teams at automotive organizations BY Economic Times Verticals  on Wed, 02 Sep 2020

         48.Attended Webinar on "Observation of Royal Charter Day- Theme: Blockchain & its impact on current Business" Wed, Sep 9, 2020 5:00 PM - 7:00 PM IST webinar@ieindia.org

          49.ATTENDED WEBINAR ON ""Seven Correct Steps for Concrete Making"". aishwarya@qcreteindia.com

          50. Sucessfully completed 2 days online course on `Kaizen-A Way to Continuous Improvement' during Aug 25,2020 to Aug 26, 2020 and cleared the exam sucessfully.   www.statmodeller.com

51.    Sucessfully completed 2 days online course on `5S-Workplace Management Practiitioner' during Aug 23,2020 to Aug 24, 2020 and cleared the exam sucessfully.   www.statmodeller.com

52.     Sucessfully completed the 7 days National Online Workshop on `Statistical Data Analysis Using SPSS'' organized by Inspira Research Association (IRA), jaipur from aug 24-30-2020

53.  Dr. Prof.(Ing) Gurudutt Sahni from Leader Valves Ltd, jal, Punjab has participated in Multidisciplinary International Webinar (in collaboration with UGC) on “Cyber Violence & Gender Equality” under the academic auspices of Bhagat Phool Singh Mahila Vishwavidyalaya, Haryana and Industry Partner DR CBS Cyber Security Services LLP, India on August 29-30, 2020.

54.   Dr. Prof.(Ing) Gurudutt Sahni has successfully participated in the National Webinar organized by Construction Industry Development Council & Engineering Council of India in association with Department of Civil EngineeringBuddha Institute of Technology, Gorakhpur On Microtunneling -A POINEERING TECHNIQUE OF TRENCHLESS TECHNOLOGY Date: 29th August, 2020

             55. Participated in the CIAC Webinar- Appointment of Arbitrators u/s 11 of Arbitration &                    Conciliation (Amendment) Act 2019 – Challenges, Limitations, Powers & Legal Position                on Wednesday 19th August, 2020 at 10.10 hrs. to 11.00 hrs.

                56. ATTENDED THE WEBINAR ON “Seven Correct Steps for Concrete                    making” September 12, 2020 BY QCRETE READYMIX (INDIA) PVT LTD

57.   attended  Webinar: Journey to an autonomous supply chain by ETAuto Economic Times Verticals Thu, 17 Sep 2020 16:30:15 

58.    Participated in the CIAC  Construction Industry Arbitration Council Webinar- Appointment of Arbitrators  u/s 11 of Arbitration & Conciliation (Amendment) Act 2019 – Challenges, Limitations, Powers & Legal Position on  Wednesday 19th August, 2020 at 10.10 hrs. to 11.00 hrs

59.    attended one week TEQIP-III sponsored short term course on the topic “AdvancedManufacturing Processess & Applications” from 24th to 28th August, 2020 organizedby the department of Mechanical Engineering, Malaviya National Institute of Technology Jaipur

60.    participated in the On-line Webinar On Why is The Entitlement of PE is Important For Academicians in Engineering Institutions * Organized by Construction Industry Develop ment Council On 25th September, 2020

61.    attended the session titled Mass Concrete - How big is big? Hosted by ACI India Chapter AMERICAN CONCRETE INSTITUTE on October 16, 2020

62.    ATTENDED THE WEBINAR ON “Role of PSC and GGBS in Sustainable concrete”October 13, 2020 QCRETE READYMIX (INDIA) PVT LTD

63.  ATTENDED FIVE DAY INTERNATIONAL WEBINAR ON``SUSTAINABLE  ENGINEERING '' FROM 14^TH TO 18^TH SEPT. 2020, ORGANIZED BY DEPARTMENT OF CIVIL ENGINEERING ANDHRA UNIVERSITY IN ASSOCIATION WITH DEPARTMENT OF ENERGY & ENVIORMENT CSIR INDIAN INSTITUTE OF CHEMICAL ENGINEERING HYDRABAD.

64.    ATTENDEDTHE WEBINAR ON “Signature Bridge at Delhi Part-2, Construction and Innovations” September 19, 2020 QCRETE READYMIX (INDIA) PVT LTD

65.  ATTENDING THE WEBINAR ON “Non-Destructive Evaluation of Reinforced concrete Structures: Non Destructive Testing Methods”September 26, 2020 QCRETE READYMIX (INDIA) PVT LTD

66.  ATTENDED THE WEBINAR ON “Seven Correct Steps for Concrete making” September 12, 2020 QCRETE READYMIX (INDIA) PVT LTD

67.                   ATTENDED INTERNATIONAL CONFERENCE  CONDUCTED BY INSPIRA INTERNATIONAL  MULTIDISCIPLINARY CONFERENCE ON  LATEST ADVANCEMENTS & FUTURE TRENDS

68.   Participated in the Webinar on “Construction Practice for Site Engineers” on 16th October, 2020 .Organizing CommitteeDepartment of Civil EngineeringYounus College of Engineering and Technology

2.      69. NATIONAL ADVISORY COMMITTE MEMBER IN 1st International Conference on Renewable Energy and Green Technology (ICREGT–2020) - Virtual Conference 09th - 10th October 2020 ORGANISED BY SRM Institute of Science and Technology (SRM IST), Ghaziabad&Institute For Engineering Research and Publication (IFERP) https://icregt.com/national-advisory-committee.php

      70. Advisory Board Member AT Global Innovative platform with International faces IOT and Intelligent Apps

1.       Conference Name: IOT & Intelligent Apps 2020 Virtual Conference ORGANISED BY IFERP https://iot.iferp

 

71. INTERNATIONAL CONFERENCE ON INNOVATIVE AGRICULTURAL ENGINEERING AND FOOD TECHNOLOGY STRATEGIES FOR PROFITABLE AGRICULTURE (ICAEFT)2020ORGANISED BY:SAI SHAKTI INSTITUTE OF ENGINEERING&TECHNOLOGYApproved by AICTE, New Delhi | Affiliated to Anna University, Chennai
    Accredited by NBA [CSE, EEE, IT, MECH] & NAAC with A Grade

 

72. Speech/Chair Invitation of Advanced Materials Conference-2021,Osaka, Japan WCAM-2021yelsa-wcam@eventcomittee.com

73.  COMMITTE  MEMBER “IOP Conference Series: Earth and Environmental Science, Volume 511, International Conference Series on: Sustainability Outreach in Developing Countries 30-31 May 2020, Okinawa, Japan

71.               ATTENDED Webinar on -"SOME OBSERVATIONS FROM CASE STUDIES RELEVANT TO GEOTECHNICAL AND STRUCTURAL FAILURES" on 6th November 2020.Department of Civil Engineering Younus College of Engineering & Technology, Kollam. 

72. ATTENDED Webinar on” Responsibilities of stakeholders of Earthquake “  From: Qcrete Readymix(India)Pvt Ltd.  Fri, Nov 6, 2020

 

 

 

Department of EEE

in Association with

 

 

Membership of other Engineering Institutions/Societies
Name of Institution/Society	Grade   of   Membership	Date of Election	Whether Still  a  Member
(ISSTE) INTERNATIONAL SOCIETY OF SCIENTIST ,TECHNOCRATS AND ENGINEERS	MEMBER	28-09-2010	YES
(ISMAE) INTERNATIONAL SOCIETY OF MECHANICAL AND AUTOMOBILE ENGINEERS	MEMBER	25-09-2010	YES
(AOMEES) ASIAN ORGANIZATION OF MECHANICAL ENGINEERING EDUCATIONIST AND SCIENTIST	MEMBER	DEC 2010	YES
(SSI) SCIENCE SOCIETY OF INDIA	MEMBER	DEC 2010	YES
(IAENG) INTERNATIONAL ASSOCIATION OF ENGINEERS (NO. 61861)	MEMBER	JAN 2007	YES
(IET) INSTITUTE OF ENGINEERING AND TECHNOLOGY,UK (ID:552-92-450)	MEMBER	JULY 2007	YES
(ISME) INDIAN SOCITY OF MECHANICAL ENGINEERING,LM-1108	LIFE  MEMBER	JUNE 2005	YES
INTERNATIONAL SOCITY OF MECHANICAL ENGINEERS	MEMBER	JUNE 2005	YES
(ISTE) INDIAN SOCITY OF TECH. EDUCATION	LIFE MEMBER	JUNE  2005	YES

 

 

Membership of other Engineering Institutions/Societies

 

Name of Institution/Society	Grade   of   Membership	Date of Election	Whether Still  a  Member
(SAE) SOCIETY OF AUTOMPBILE ENGINEERS NO. 7052300005	MEMBER	JULY 2009	YES
(IIM) INDIAN INSTITUTE OF METALS	MEMBER	JULY 2009	YES
(IIW) INDIAN INSTITUTE OF WELDING DEL/M/R-9312       (WASET) World Academy of Science, Engineering and Technology	MEMBER       (WASET)Member Scientific Committee and Editorial Review Board on Engineering and Physical Sciences	JULY 2009       JAN 2013	YES         YES